The Turin CF64V gives you two separate ways to tune your grind: a stepless dial for particle size and an RPM control for burr speed. It is a 64mm flat-burr single-dose grinder for a home coffee bar where espresso and filter coffee both get attention. Its narrow body fits into a compact setup, while the pre-breaker auger, bellows and chute knocker make grounds handling part of the everyday workflow.
The motor can be set from 800 to 1,800 RPM. Changing speed can alter grinding time, bean feeding and how a particular burr set behaves. Treat RPM as a recipe variable rather than a shortcut to better coffee: first establish a dose, yield and grind setting you like, then compare speeds while keeping the other variables steady. There is no universal setting for every bean or brew method.
An auger moves beans toward the vertically arranged burrs and can break down larger beans before they enter the cutting area. The proportion pre-broken varies with bean size and shape. The installed stainless-steel burrs provide a practical starting point across espresso and brewed coffee. Compatible 64mm aftermarket burrs offer another route for experimentation, but fit and geometry should be checked for the specific set before purchase.
Weigh the beans, select your grind and speed, and use the included cup to collect the grounds. The anti-popcorn hopper helps manage the final beans entering the grinder. A plasma ion generator reduces static at the exit; the bellows and integrated knocker help release grounds that remain inside. Check output weight while learning the grinder. These features reduce carryover, but do not promise completely zero retention with every coffee.
The magnetic dial cover lifts away to expose the fasteners used for burr access. The included Allen key helps with the specified maintenance procedure. Disconnect power before opening the grinder, note component orientation and use dry cleaning methods. Coffee oils and compacted grounds can gradually change feeding and static behavior, so inspect the chute as well as the burr chamber.
Black units use a matching black adjustment dial; Grey and White units have a silver dial. Availability is specific to the selected finish. At approximately 4.33 inches wide, the CF64V uses little counter width, but its 12.48-inch depth still needs to be allowed for. Leave working space above the hopper and in front of the cup.
| Burrs | 64mm stainless-steel flat burrs |
|---|---|
| Motor | 400W brushless DC |
| Speed range | 800–1,800 RPM |
| Grind adjustment | Stepless |
| Feed system | Pre-breaker auger and anti-popcorn hopper |
| Static and retention features | Plasma ion generator, bellows and integrated chute knocker |
| Body | Painted aluminum alloy |
| Electrical version | 120V U.S. model |
| Dimensions | Approximately 12.48 in D × 4.33 in W × 12.60 in H |
| Net weight | Approximately 11.68 lb |
CF64V grinder with stainless-steel burrs, anti-popcorn hopper, bellows with wooden lid, anodized aluminum dosing cup and Allen key.
Choose DF64 Gen 2.7 for a simpler fixed-speed 64mm workflow, or DF64V Gen 3 for the alternative angled-body variable-speed layout. DC63 offers a conical-burr single-dose design.
No. The grind dial changes burr spacing; RPM changes how quickly the motor turns. Keep track of both when comparing recipes.
Yes. The stepless range covers fine espresso and coarser brewed-coffee settings. Each method still needs its own recipe and dial-in.
No. It releases loose grounds during use. Periodic cleaning is still needed to remove oils and buildup.
It suits a home barista who wants adjustable speed and a controlled-feed 64mm platform, and is willing to weigh individual doses.
These videos add outside perspectives. Opinions belong to the creators; prices, regional branding and tested configurations may differ from the current listing.
English review of the CF64V platform sold under the MiiCoffee name. Regional branding and supplied details can differ.
An English review based on a month of daily use. The creator discloses affiliate relationships on his website.
Shipping and delivery requirements vary by product, destination, and order type. Review the product-specific notes on this page and our shipping policy, return and cancellation terms, and warranty policy before ordering.
Preorder estimates appear in the product description and can change. Contact our team if you need help confirming requirements.
The CF64V grinder I bought is a excellent grinder. It's consistent, quiet and looks nice on my counter next to my beautiful ECM espresso machine. The only reason for not giving it 5 stars is the dosage cup sits a little low. The grinds tend to sill out of the cup as its sits a little to far below the grinder spout. I did raise it up with a spacer and that helped a lot. They should think about positioning the dosage cup closer to the spout so the grinds stay in the cup better. Otherwise it's a fine grinder. Maybe an update later.
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Solid, faster, and beautiful. Great cost-benefit option!
After 3 years of daily 1st Gen DF83 use… A user abuse left me in need of a replacement espresso grinder.
The DF83v was ultimately what I committed to purchasing.
Every step of my daily coffee is improved.
I can't tell you how much this grinder is incredible! It is so much quieter than the previous grinders that I have had. The weight of it feels so sturdy, it's going nowhere. All and all, this is a high quality top of the line own grinders that anybody can invest in!
Thank you for the great grinder! The DF54 arrived in perfect condition and plugged right into our 220V setup with no issues. The grind is very uniform, there's almost no static, and for a single-dose espresso grinder at this price, it's an absolute gem. Special thanks to the seller for fast shipping and secure packaging!
Turin DF64 Gen 2.7 Single-Dose Coffee Grinder