The Turin Gallatin DB is the dual-boiler model in the Gallatin family. Separate one-liter brew and steam boilers let you set the two jobs independently, while the E61 group, rotary pump and included flow-control paddle retain a hands-on espresso routine. It is a good fit for someone who wants temperature flexibility and milk-drink capability in a traditional machine.
Two boilers with separate temperature control
The brew boiler supplies extraction water and the steam boiler handles steam and hot water. Each has its own PID control, so changing a brew setting does not require changing the steam boiler’s target. This is a different heating arrangement from the Gallatin V and R heat exchangers. You still need to allow the group and portafilter to warm fully; ready water and fully warmed metal are not the same thing.
Rotary pump and installation flexibility
The Italian Fluid-o-Tech rotary pump supports a reservoir-based setup or a direct-water installation. The removable reservoir holds approximately 1.7 liters. If you plan to plumb the machine, account for suitable water treatment, connection access and drainage before placing it. Direct supply removes the need to refill a tank by hand, but does not remove the need to monitor water quality and service the machine.
Use flow control to explore a recipe
The included E61 paddle changes water delivery during extraction. It allows you to explore a slower initial wetting stage or adjust the later part of a shot. Begin with a repeatable recipe and make one change at a time. A paddle does not correct uneven puck preparation, and a pressure reading depends partly on the resistance of the coffee bed.
A milk-drink workflow with less compromise
The separate steam boiler keeps steam heating distinct from brew-water control. Use the steam wand with a pitcher sized for your drink, then purge and wipe it promptly. When serving several drinks, keep an orderly routine for grinding, brewing and steaming rather than assuming a home machine has unlimited commercial throughput.
Check dimensions before installation
The body is approximately 11.26 inches wide and 17.44 inches deep, with a listed height of 15.55 inches. Leave additional room for the portafilter handle, cups, reservoir access and the brew lever. The 53.5-pound weight calls for a stable counter. Keep the manual available for startup, water-supply configuration and maintenance instructions.
Turin Gallatin DB Dual-Boiler Espresso Machine specifications
Specifications and practical details
Brew boiler
1L stainless steel
Steam boiler
1L stainless steel
Temperature control
Independent PID controls
Group
E61; 58mm portafilter
Pump
Italian Fluid-o-Tech rotary
Flow control
Included E61 paddle
Water supply
1.7L reservoir or direct connection
Electrical
120V, 60Hz; 1,450W
Dimensions
Approximately 11.26 in W × 17.44 in D × 15.55 in H
Weight
Approximately 53.5 lb
Compare your options
Gallatin R is the rotary-pump heat-exchanger alternative. Legato V2 offers a smaller brew-boiler and steam-thermoblock setup.
Frequently asked questions
What is the main difference from the Gallatin R?
The DB has separate brew and steam boilers. The R uses a single heat-exchanger boiler; both configurations offer a rotary pump and flow control.
Can I use the DB without a water-line connection?
Yes. Use the removable reservoir if you are not installing a direct supply.
Does it make the shot automatically?
You operate the brew lever and can adjust the flow paddle. A capable grinder, scale and consistent puck preparation remain part of the process.
Espresso Outlet videos are retailer demonstrations and support guides. Other creators offer their own opinions and may disclose supplied products or affiliate links. Older reviews can show different accessories or revisions; the specifications above describe this listing.
Espresso Outlet LLC — Turin Gallatin DB Overview | Dual Boilers, PID, Flow Control & Plumbing
Espresso Outlet product demonstration or support video.
I am thrilled with my Gallatin Dual Boiler. The quality of the build is solid. The machine is heavy and well built. The fit and finish of all the surfaces is very nice. Effort has been made to minimize the amount of sharp edges. The selling points for the machine are numerous and allow it to punch far above its weight class. The rotary pump is as quiet as you would expect. All the wood touchpoints provide a warmth to the design that is appreciated. This machine is everything I had hoped it would be, and my hopes were high. Turin has hit it out of the park with the Gallatin Dual Boiler.
California Prop 65 Warning for Products with Metal
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Excellent Grinder with Little Retention and Easy Workflow
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Muy bueno, recomiendo, soy de argentina, Buenos Aires y llego todo genial.
Fue por DHL, tardo 1/2 semanas aprox. Paga IVA cuando entra siempre cuando valga menos de 400usd, si vale mas el excedente paga mas impuestos dentro de los 5 envíos por persona por año.
I'm in love with my new Turin DF64 Gen 2.7 Grinder
So far, I've had a great experience with this grinder. It's a huge improvement over my previous Oster BVSTBMH23 grinder: it's quieter, much faster, and has almost no retention after pressing the hopper bellows a few times. It's quite heavy, so you'll want to find a permanent spot for it. You'll want to make coffee more frequently anyway. :)
I love this grinder! It is fast, is easy to adjust the grind, and the bellows clear out the burns. It also looks great on my counter. I did watch a lot of videos because this is my first real grinder, but it is pretty intuitive. Highly recommend.
rbsbscrp
Excellent Grinder with Little Retention and Easy Workflow
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Turin DF83V V3 Variable-Speed 83mm Coffee Grinder
Juan Camilo GonzálezArango
Beautiful and strong grinder
Solid, faster, and beautiful. Great cost-benefit option!
Turin DF54 v4.1 Single Dose Flat Burr Grinder
Vince H.
From DF83 toDF83v
After 3 years of daily 1st Gen DF83 use… A user abuse left me in need of a replacement espresso grinder.
The DF83v was ultimately what I committed to purchasing.
Every step of my daily coffee is improved.
Turin DF83V V3 Variable-Speed 83mm Coffee Grinder
Nina Gh
Best grinder ever!
I can't tell you how much this grinder is incredible! It is so much quieter than the previous grinders that I have had. The weight of it feels so sturdy, it's going nowhere. All and all, this is a high quality top of the line own grinders that anybody can invest in!
Turin DF54 v4.1 Single Dose Flat Burr Grinder
Yelena
Top choice for single-dose espresso!
Thank you for the great grinder! The DF54 arrived in perfect condition and plugged right into our 220V setup with no issues. The grind is very uniform, there's almost no static, and for a single-dose espresso grinder at this price, it's an absolute gem. Special thanks to the seller for fast shipping and secure packaging!
