220V with EU plug. This is not the 120V U.S. version.
This DF64 Gen 2.7 listing is configured for 220V mains power with an EU plug. It brings the fixed-speed, 64mm flat-burr single-dose workflow to an international installation. Choose the stainless-steel or Red Titanium option in the selector, then weigh beans for each drink and use the stepless collar to dial in.
Confirm the electrical version first
This listing is for a 220V grinder with an EU plug, intended for non-U.S. international customers. A plug adapter does not convert voltage. Check the supply and plug requirements at the installation location before ordering. For U.S. mains power, use the separate 110–120V DF64 listing.
Current generation and burr choices
The current listing states that units ordered or received after July 2026 are Gen 2.7, including the convex anti-popcorn blocker. This replaces the older V2.4 reference in the former description. The available burr options are stainless steel and Red Titanium; older videos referring to DLC describe a different configuration. SSP burrs are not currently sold internationally through this listing.
A weighed-dose workflow
Load the beans you intend to brew, grind into the cup and compare input and output weight while establishing a routine. The plasma ion generator helps control static, and the bellows help move grounds out of the chamber. Low retention varies with coffee, humidity and cleanliness; it is not a guarantee of zero carryover. The automatic stop is a 45-second limit rather than a weighing system.
Maintenance and useful space
Leave room above the approximately 12-inch body to load beans and use the bellows. Keep the chute and ion probes clean following the support guide. Unplug before accessing the burr chamber. When switching between espresso and filter settings, record your own starting points and allow for a small amount of coffee from the previous setting.
International delivery
Under the published international shipping policy, the buyer is responsible for applicable import duties, taxes and fees. Check the requirements for your destination before ordering. Tracking can take a week or more to update after it is provided, and customs processing can take weeks. International shipments are not considered lost until 45 days. Read the international shipping policy before placing an order.
Turin DF64 Gen 2.7 Grinder specifications
Specifications and practical details
Electrical configuration
220V with EU plug; not the U.S. 120V model
Generation
DF64 Gen 2.7, per current shipment notice
Burrs
64mm flat; stainless steel or Red Titanium selected above
Adjustment
Stepless
Motor
250W; fixed speed
Capacity
Approximately 50g with bellows
Static control
Plasma ion generator
Dimensions
Approximately 10 in D × 5.2 in W × 12 in H
Weight
Approximately 15 lb
What is included
Current grinder with selected Turin burrs, bellows and lid, black dosing cup, silicone support wedge, metal grind indicator and cleaning brush.
A plug adapter only changes the connector shape. It does not make a 220V grinder suitable for a 120V supply.
Are SSP burrs included or available for international purchase here?
No. Select one of the listed Turin burr options; SSP burrs are not currently sold internationally through this listing.
Are the review units electrically identical?
Reviewers may use a 120V unit or a different regional brand. Reviews illustrate the platform and workflow; this listing defines the electrical configuration.
Setup and troubleshooting
Use the DF64 Gen 2 support guide for setup and maintenance. Match any instructions to the production version you received.
Product videos and demonstrations
Espresso Outlet videos are retailer demonstrations and support guides. Other creators offer their own opinions and may disclose supplied products or affiliate links. Older reviews can show different accessories or revisions; the specifications above describe this listing.
Espresso Outlet LLC — Turin Ion Generator Cleaning - Reduce Static in DF54 DF64 and DF83
Espresso Outlet product demonstration or support video.
Muy bueno, recomiendo, soy de argentina, Buenos Aires y llego todo genial.
Fue por DHL, tardo 1/2 semanas aprox. Paga IVA cuando entra siempre cuando valga menos de 400usd, si vale mas el excedente paga mas impuestos dentro de los 5 envíos por persona por año.
Recomiendo la página.
M
Martin B.
I'm in love with my new Turin DF64 Gen 2.7 Grinder
So far, I've had a great experience with this grinder. It's a huge improvement over my previous Oster BVSTBMH23 grinder: it's quieter, much faster, and has almost no retention after pressing the hopper bellows a few times. It's quite heavy, so you'll want to find a permanent spot for it. You'll want to make coffee more frequently anyway. :)
R
Rashith Jayasekara
well worth the price
G
Georgios Vasileiadis
Turin df64 gen 2
The DF64 Gen 2 (220V) is easily one of the best value-for-money single-dose grinders right now.
Why it’s worth it:
• Café-quality shots: I’ve ground several different coffee beans with it, and the results honestly taste as good as what you'd get at a top-tier specialty coffee shop.
• No static mess: The new plasma generator actually works—chute retention is practically zero.
• Great stock burrs: The 64mm DLC burrs handle both espresso and filter well, giving great clarity and consistency.
• Easy to upgrade: Fits standard 64mm SSP burrs if you ever want to swap them later.
• Build quality: Solid metal body, feels sturdy, and handles light roasts without stalling.
Drawbacks:
• A bit noisy when grinding hard beans.
• Power button location feels slightly awkward at first.
Bottom line: If you want precision flat-burr performance for home espresso without spending a fortune, this is the one to get.
S
Stig Hess
Turin DF64 Gen 2 - 220V - Single Dose Coffee Grinder (EU 220V Plug)
California Prop 65 Warning for Products with Metal
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Excellent Grinder with Little Retention and Easy Workflow
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Turin DF83V V3 Variable-Speed 83mm Coffee Grinder
Juan Camilo GonzálezArango
Beautiful and strong grinder
Solid, faster, and beautiful. Great cost-benefit option!
Turin DF54 v4.1 Single Dose Flat Burr Grinder
Vince H.
From DF83 toDF83v
After 3 years of daily 1st Gen DF83 use… A user abuse left me in need of a replacement espresso grinder.
The DF83v was ultimately what I committed to purchasing.
Every step of my daily coffee is improved.
Turin DF83V V3 Variable-Speed 83mm Coffee Grinder
Nina Gh
Best grinder ever!
I can't tell you how much this grinder is incredible! It is so much quieter than the previous grinders that I have had. The weight of it feels so sturdy, it's going nowhere. All and all, this is a high quality top of the line own grinders that anybody can invest in!
Turin DF54 v4.1 Single Dose Flat Burr Grinder
Yelena
Top choice for single-dose espresso!
Thank you for the great grinder! The DF54 arrived in perfect condition and plugged right into our 220V setup with no issues. The grind is very uniform, there's almost no static, and for a single-dose espresso grinder at this price, it's an absolute gem. Special thanks to the seller for fast shipping and secure packaging!
Excellent Grinder with Little Retention and Easy Workflow
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Muy bueno, recomiendo, soy de argentina, Buenos Aires y llego todo genial.
Fue por DHL, tardo 1/2 semanas aprox. Paga IVA cuando entra siempre cuando valga menos de 400usd, si vale mas el excedente paga mas impuestos dentro de los 5 envíos por persona por año.
I'm in love with my new Turin DF64 Gen 2.7 Grinder
So far, I've had a great experience with this grinder. It's a huge improvement over my previous Oster BVSTBMH23 grinder: it's quieter, much faster, and has almost no retention after pressing the hopper bellows a few times. It's quite heavy, so you'll want to find a permanent spot for it. You'll want to make coffee more frequently anyway. :)
I love this grinder! It is fast, is easy to adjust the grind, and the bellows clear out the burns. It also looks great on my counter. I did watch a lot of videos because this is my first real grinder, but it is pretty intuitive. Highly recommend.
