The Turin DF83 Gen 2 puts a large 83mm flat-burr set into a straightforward single-dose workflow. It is a good match for a home barista who wants espresso-focused burrs and substantial grinding power without adding RPM adjustment to the routine. The polished collar provides stepless control, and the included black cup collects a weighed dose for espresso or brewed coffee.
The standard package includes Turin Red Titanium-coated 83mm espresso burrs. Four guide posts and four springs support the upper carrier in the redesigned Gen 2 body. This is a different model from the variable-speed DF83V, and its current exterior should not be confused with older DF83 V2 reviews. If you order optional SSP burrs, they arrive separately from the installed factory set and need installation and alignment.
The 550W motor operates at a published fixed 1,400 RPM. You control extraction primarily through grind size, coffee dose and brew recipe. A large burr diameter gives you a different platform and throughput potential, but it does not guarantee a better cup than a smaller grinder. Coffee choice, burr geometry and preparation still matter.
The stock set is espresso-focused, making this a practical choice for shots and milk drinks. The adjustment range also extends to coarser filter and immersion brewing. If filter coffee becomes your main priority, compare compatible brew-focused burr options before buying an upgrade. Start with the stock set long enough to understand what you want to change in the cup.
Weigh the beans before grinding. The anti-popcorn collar helps manage bean entry into the running grinder, and the bellows help clear the remaining grounds. Ion-generator probes in the chute reduce static, but the chamber and probes still need routine cleaning. Use the dosing cup for a predictable transfer and weigh output when changing coffees or grind settings. Retention varies; zero waste is not guaranteed.
Allow approximately 9 inches of depth, 6 inches of width and 14.5 inches of height with the bellows. Leave extra loading clearance above that. At around 24 pounds, the DF83 Gen 2 is better treated as a permanent counter fixture than something to pack away after every use. Disconnect it before opening the grinding chamber.
| Burrs | 83mm Turin Red Titanium-coated flat espresso burrs |
|---|---|
| Adjustment | Stepless polished-aluminum collar |
| Motor | 550W |
| Speed | Fixed, published 1,400 RPM |
| Electrical | 120V, 60Hz |
| Dose capacity | Approximately 50g |
| Static control | Plasma ion generator |
| Cup | 58mm black metal dosing cup |
| Dimensions | Approximately 9 in D × 6 in W × 14.5 in H with bellows |
| Weight | Approximately 24 lb |
DF83 Gen 2 grinder, installed Red Titanium burrs, silicone bellows, wooden lid, black metal dosing cup, silicone cup tilter, chute-cleaning brush and manual.
DF64 Gen 2.7 takes up less space and uses 64mm burrs. DF83V V3 retains 83mm burrs while adding a variable-speed brushless motor and controlled-feed layout.
No. Choose DF83V V3 if adjustable speed is a priority.
No. The factory Red Titanium set remains included. Optional SSP burrs require customer installation and alignment.
The support can accommodate many 58mm portafilters, but handle and ear shapes vary. The included cup is the simplest way to avoid a fit issue.
No. It has a wider grind range, although the standard burr geometry is chosen with espresso in mind.
These videos add outside perspectives. Opinions belong to the creators; prices, regional branding and tested configurations may differ from the current listing.
English demonstration using optional SSP Lab Sweet burrs. Those are not the factory Red Titanium burrs supplied with this listing.
Shipping and delivery requirements vary by product, destination, and order type. Review the product-specific notes on this page and our shipping policy, return and cancellation terms, and warranty policy before ordering.
Preorder estimates appear in the product description and can change. Contact our team if you need help confirming requirements.
Love it so far. The speed at which it grinds a whole 20g dose is lightning ⚡️ fast! My only “complaint” would be that it does have a little bit of retention. Not a tremendous amount, but still noticeable no matter how hard you slap around those bellows. Still a solid 5 ⭐️ review. Can’t beat the quality you get for the price.
WARNING:
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.
Turin DF64 Gen 2.7 Single-Dose Coffee Grinder
I purchased my DF83V in July of 2025 (from Coffee Addicts). First of all, I LUVLUVLUV this grinder! I was coming from an Eureka Mignon Silenzio (55mm flat burr). That was very well made, and was reliable but it needed serious shimming, a Single Dosing Kit (from Etsy), and my Profitec portafilter never fit it properly. Even though the coffee it makes is better, the biggest improvement that I enjoy every morning I think is the change in workflow.
I tested the DF83V to find it didn't need any shimming, but I did have to wait more than 3 months to get past the break-in period. The grinder consistency is not the best during this break-in period. The 83mm burrs devour the beans quickly and the results are excellent. There is almost no retention to speak about.
I bought the silver model and found it was hard to read the white lines on the dial under the kitchen lights. I then purchased a black dial from Turin and replaced it - that's much better.
As with any variable speed grinder, you can jam the grinder with light roast (ie. "hard") beans if you run the rpm too low (< 400). My biggest issue has been that under 900 rpm I can't hear it running when not grinding and I have several times left it running all day. I now only use 1100 rpm - because I can hear that . LOL
The biggest operational issue to manage carefully is the rate at which you pour in the beans - if you are not consistent then you will not get consistent grinder results (it can vary a lot). Some people like to slow-feed. IMO this huge-burred grinder doesn't need slow-feed and I weigh my beans in a cup and then pour them in. I get great consistency.
The grinder is easy to disassemble without tools and clean - although I've not found it necessary.
I highly recommend this grinder. Just excellent.
Solid, faster, and beautiful. Great cost-benefit option!
After 3 years of daily 1st Gen DF83 use… A user abuse left me in need of a replacement espresso grinder.
The DF83v was ultimately what I committed to purchasing.
Every step of my daily coffee is improved.
I can't tell you how much this grinder is incredible! It is so much quieter than the previous grinders that I have had. The weight of it feels so sturdy, it's going nowhere. All and all, this is a high quality top of the line own grinders that anybody can invest in!
Thank you for the great grinder! The DF54 arrived in perfect condition and plugged right into our 220V setup with no issues. The grind is very uniform, there's almost no static, and for a single-dose espresso grinder at this price, it's an absolute gem. Special thanks to the seller for fast shipping and secure packaging!